How to design the position of the rocker switch panel and socket?

July 03, 2019

How to design the position of the rocker switch panel and socket?

The Rocker Switches is also called a ship type switch, a power switch, and an IO switch.

The position of the Momentary Rocker Switches panel and the socket is unreasonable, which will bring a lot of inconvenience in the future life. The following experiences are obtained in the design:

1. The height of the Waterproof Rocker Switch panel: Under normal circumstances, there is no problem with the general height, but what you have to consider is, if you have something in both hands, how do you like to turn on the lights, for example, when I hold things in both hands, I like to use the cheeks to turn on the lights, then the height of the switch I designed should be suitable for the position where I can use my cheeks, and some people like to use the elbows to turn on the lights, then the height of his design should be adapted to the elbows.

2. The On Off Rocker Switches of each room should be set at the door of your door, and you can easily reach the place with your hand. If you design it too far inside, you have to move a few steps in the dark to open it. Knocked down some invisible things.

3. The average person keeps the socket position very low, but also consider some sockets that are left high. For example, the socket reserved for the iron should be about the same height as your ironing board.

4. Each room should have at least one jack that will not be blocked by anything, which will make it easier to use appliances such as vacuum cleaners in the future.

vorig

Neem contact op

Author:

Ms. Miss Pan

E-mail:

amanda@yeswitches.com

Phone/WhatsApp:

+86 18938293667

populaire producten

Nieuws